We can be reached at 1-800-888-1447 or email us by submitting a ticket.


Our customer service team is now open at the below hours:


Monday to Friday 9:00AM EST to 5:00PM EST

Go to Burpee Submit a ticket My Tickets Log in
Open navigation

Learn about Snapdragon

Snapdragons: Indoor Sow or Potted Plant Annual

How to Sow and Plant

Snapdragons may be grown from seed sown early indoors and transplanted outside after frost, or from potted plants. 

 Sowing Seed Indoors:

  • Sow snapdragon seeds indoors 12 weeks before last frost using a seed starting kit.
  • Sow seeds thinly and barely press into seed starting formula do not cover with soil.
  • Keep the soil moist at 65 degrees, as snapdragons prefer cooler soil so do not use bottom heat.
  • Seedlings emerge in 8-14 days.
  • As soon as seedlings emerge, provide plenty of light on a sunny windowsill or grow seedlings 3-4 inches beneath fluorescent plant lights turned on 16 hours per day, off for 8 hours at night. Raise the lights as the plants grow taller. Incandescent bulbs will not work for this process because they will get too hot. Most plants require a dark period to grow, do not leave lights on for 24 hours.
  • Thin to one seedling per cell when they have two sets of leaves.
  • To encourage better branching, pinch the tops off when the seedlings reach 3-4 inches tall.
  • Seedlings do not need much fertilizer, feed when they are 3-4 weeks old using a starter solution (half strength of a complete indoor houseplant food) according to manufacturer’s directions.
  • Transplant hardened-off seedlings to the garden after the last heavy frost. Snapdragons can tolerate light frost.
  • Before planting in the garden, seedling plants need to be “hardened off”. Accustom young plants to outdoor conditions by moving them to a sheltered place outside for a week. Be sure to protect them from wind and hot sun at first. If frost threatens at night, cover or bring containers indoors, then take them out again in the morning.  This hardening off process toughens the plant’s cell structure and reduces transplant shock and scalding.

Planting Potted Plants in the Garden:

  • Select a location in full sun with good rich, well-drained, moist organic soil.
  • Prepare the bed by turning the soil under to a depth of 8 inches. Level with a rake to remove clumps of grass and stones.
  • Most plants respond well to soils amended with organic matter. Compost is a wonderful form of organic matter with a good balance of nutrients and an ideal pH level, it can be added to your planting area at any time. If compost is not available, top dress the soil after planting with 1-2 inches of organic mulch, which will begin to breakdown into compost. After the growing season, a soil test will indicate what soil amendments are needed for the following season.
  • Plants should stand 6 to 12 inches apart in the garden.
  • Dig a hole for each plant large enough to amply accommodate the root ball.  
  • Place the top of the root ball even with the level of the surrounding soil. Fill with soil to the top of the root ball. Press soil down firmly with your hand leaving a slight depression around the plant to hold water.  
  • Water thoroughly, so that a puddle forms in the saucer you have created. This settles the plants in, drives out air pockets and results in good root-to-soil contact.
  • Use the plant tag as a location marker.  

 

How to Grow

  • Keep weeds under control during the growing season. Weeds compete with plants for water, space and nutrients, so control them by either cultivating often or use a mulch to prevent their seeds from germinating.  
  • Mulches also help retain soil moisture and maintain even soil temperatures. For annuals an organic mulch of shredded leaves lends a natural look to the bed and will improve the soil as it breaks down in time. Always keep mulches off a plant’s stems to prevent possible rot.
  • Keep plants well-watered during the growing season, especially during dry spells. Plants need about 1 inch of rain per week during the growing season. Use a rain gauge to check to see if you need to add water. It's best to water with a drip or trickle system that delivers water at low pressure at the soil level. If you water with overhead sprinklers, water early in the day so the foliage has time to dry off before evening, to minimize disease problems. Keep the soil moist but not saturated.
  • Until plants become established, some protection from extreme winds and direct, hot sunlight may be necessary. Good air movement is also important.
  • After new growth appears, a light fertilizer may be applied. Keep granular fertilizers away from the plant crown and foliage to avoid burn injury. Use low rates of a slow release fertilizer such as Flower-tone, as higher rates may encourage root rots.
  • Taller varieties may require staking.
  • Remove spent flower spikes to encourage flowering and prevent seed development. Pinching the growing tips of plants can encourage bushiness. Snapdragons make terrific cut flowers, and cutting the flowers encourages new blooms.
  • Monitor for pests and diseases. Check with your local Cooperative Extension Service for pest controls recommended for your area.
  • Remove plants after they are killed by frost in fall to avoid disease issues the following year.

 

Growing Tips

  • Snapdragons bloom best in well-drained, moist soil, in cool late-spring or early-summer temperatures. They can tolerate light shade but bloom much better in full sun. 
  • Snapdragons tend to stop producing flowers when hot weather arrives, but they will usually re-bloom when the weather cools off in late summer if you cut back the spent flower stalks. 
  • Snapdragons are available in a broad range of heights, so they may be used in many ways in the garden. Small cultivars work well as an annual ground cover, as an edging, or in pots or window boxes. The spiky form of taller cultivars adds an attractive accent to annual and mixed borders. 
  • Tall snapdragon cultivars also make remarkably long-lived cut flowers

 

Common Disease Problems

Bacterial Leaf Spot: First signs are small translucent spots with a broad yellowish edge that slowly enlarge and become angular or irregularly circular with a reddish center. It thrives in cooler temperatures. The disease may also affect and disfigure flower heads. Burpee Recommends: Remove infected plants. Rotate crops with plants in a different family. Avoid overhead watering. Do not work around plants when they are wet. 

Botrytis: This fungus causes a grey mold on flowers, leaves, stems and buds. It thrives in cool wet weather conditions. Burpee Recommends: Remove affected plant parts, avoid watering at night and getting water on the plant when watering. Make sure plants have good air circulation. Contact your Cooperative Extension Service for fungicide recommendations. 

Damping Off: This is one of the most common problems when starting plants from seed. The seedling emerges and appears healthy; then it suddenly wilts and dies for no obvious reason. Damping off is caused by a fungus that is active when there is abundant moisture and soils and air temperatures are above 68 degrees F. Typically, this indicates that the soil is too wet or contains high amounts of nitrogen fertilizer. Burpee Recommends: Keep seedlings moist but do not overwater; avoid over-fertilizing your seedlings; thin out seedlings to avoid overcrowding; make sure the plants are getting good air circulation; if you plant in containers, thoroughly wash them in soapy water and rinse in a ten per cent bleach solution after use.

Powdery Mildew: This fungus disease occurs on the top of the leaves in humid weather conditions. The leaves appear to have a whitish or greyish surface and may curl. Burpee Recommends: Avoid powdery mildew by providing good air circulation for the plants by good spacing and pruning. Contact your Cooperative Extension Service for fungicide recommendations. 

Rust: A number of fungus diseases that rust colored spots on foliage, stalks and husks. Burpee Recommends: Practice crop rotation. Remove infected plants. Contact your Cooperative Extension Service for fungicide recommendations. 

 

Common Pest and Cultural Problems

Aphids: Greenish, red, black or peach colored sucking insects can spread disease as they feed on the undersides of leaves. They leave a sticky residue on foliage that attracts ants. Burpee Recommends: Introduce or attract natural predators into your garden such as lady beetles and wasps who feed on aphids. You can also wash them off with a strong spray, or use an insecticidal soap. 

Cutworms: These insects cut off the seedlings at the soil level. Burpee Recommends: Place a paper cup collar (use a coffee cut with the bottom cut out) around the base of the plant. They are usually mostly a problem with young seedlings. You can also control by handpicking and controlling weeds, where they lay their eggs. 

Cyclamen Mite: These mites damage plants by sucking juice from stems and leaves. They multiply rapidity in hot, dry weather. They can only be seen using a magnifying glass. Plants will look distorted and stunted, and may not bloom. Flowers will be distorted, streaked and blotched. Leaves can become cupped, curled, dwarfed and thickened. Burpee Recommends: Discard plants that are severely infested. Avoid working with infested plants. Keep plants watered in dry weather. For heavy infestations consult your Cooperative Extension Service for insecticide recommendations. 

Leafminers: These insects bore just under the leaf surface causing irregular serpentine lines. The larvae are yellow cylindrical maggots and the adults are small black and yellow flies. They do not usually kill plants, but disfigure the foliage. Burpee Recommends: Remove affected foliage. 

Spider Mites: These tiny spider-like pests are about the size of a grain of pepper. They may be red, black, brown or yellow. They suck on the plant juices removing chlorophyll and injecting toxins which cause white dots on the foliage. There is often webbing visible on the plant. They cause the foliage to turn yellow and become dry and stippled. They multiply quickly and thrive in dry conditions. Burpee Recommends: Spider mites may be controlled with a forceful spray every other day. Try hot pepper wax or insecticidal soap. Check with your Cooperative Extension Service for miticide recommendations. 

 

Snapdragon FAQs

How do I condition my cut snapdragon flowers?  Bring a bucket of water with you to the garden when you cut your flowers and put them in the water as soon as you cut them. This will allow them to take up water through the freshly cut stem. Cut on an angle to give more surface area for the water to be taken up. Keep them out of the direct sun. 

Do I need to stake my snapdragons? Taller varieties may benefit from staking, especially if they are in a windy area. 

What will snapdragons attract to my garden? Snapdragons will attract hummingbirds, butterflies and bees to the garden.

Are snapdragons deer resistant? If you have a lot of deer and little food deer may eat the plants, however snapdragons are rarely damaged by deer. 

Why didn’t my snapdragons sprout? Snapdragons need light to germinate, just press them into the seed starting soil do not bury them. Do not allow them to dry out, cover them with a clear plastic cover.

 

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.